Home > Gear/Tech > Kifaru Gear > Kifaru Tents and Shelters >

Kifaru - Para Tarp - Coyote Brown - PHTP101
Kifaru - Para Tarp - Coyote Brown - PHTP101
 
Alternative Views


Tech Specs at a Glance:

Weight: 13.40 oz. / 0.84 lbs.
Best Suits: 1 Person
Flat Dimensions: 9.60 ft. long / 8.0 ft. wide front / 5.0 ft. wide back
Pitched Dimensions (Length): 7.80 ft.
Pitched Dimensions (Front Width/Height): 55.0" / 42.0"
Pitched Dimensions ( Rear Width/Height): 55.0" / 26.0"
Included: Instruction manual, paracord & seam sealer
Price: $296.40

Quantity Available:5

Description
 
Kifaru - Para Tarp - Coyote Brown - PHTP101:

Ultralight shelter for one person and gear or two folks in emergency. Small and light enough to always toss into a daypack for bombproof bivy-ing. The basic shelter is open at the front for 3 season use.

Note: This item does not include the required pegs.


Features & Design:

  • Weight: 13.40 oz. / 0.84 lbs.
  • Best Suits: 1 Person
  • Flat Dimensions: 9.60 ft. long / 8.0 ft. wide front / 5.0 ft. wide back
  • Pitched Dimensions (Length): 7.80 ft.
  • Pitched Dimensions (Front Width/Height): 55.0" / 42.0"
  • Pitched Dimensions ( Rear Width/Height): 55.0" / 26.0"
  • Highly wind resistant (60 mph+) and water proof, regardless of configuration
  • Can be pitched as a flat tarp or shelter
  • Included: Instruction manual, paracord & seam sealer
Pitching Options:

1.
Pitch your shelter tight to allow sealer to penetrate and waterproof the stretched seams, stitch holes and thread.

2.
Fabric should be clean and dry (this sealer claims to cure in wet or damp conditions). Use a paper cup, mix sealant and mineral spirit
(paint thinner) until you have a slurry about the thickness of molasses. Using a 1/2" inch paint brush, apply to all sewn areas, seams, bartacks and holes. *Do not place seam sealer on the zipper teeth. This will cause you problems down the road.

3.
Curing: leave the tent pitched until the sealant is not tacky, the longer the better. Fully cures in 24 hours but dries tack free in about 30 minutes to 1 hour.


Seam Sealing:

1.
Pitch your shelter tight to allow sealer to penetrate and waterproof the stretched seams, stitch holes and thread

2.
Fabric should be clean and dry (this sealer claims to cure in wet or damp conditions). Use a paper cup, mix sealant and mineral spirit (paint thinner) until you have a slurry about the thickness of molasses. Using a 1/2" inch paint brush, apply to all sewn areas, seams, bartacks and holes.

3.
Do not place seam sealer on the zipper teeth. This will cause you problems down the road c
uring: leave the tent pitched until the sealant is not tacky, the longer the better. Fully cures in 24 hours but dries tack free in about 30 minutes to 1 hour